Universal Cruise Control System Stabilizer Car Speed Limiter Fit for DC12V vehicle with 6PIN Throttle Connector

 

 

If there is less than 3 pins, need to change the clock spring;

If there is more than 3 pins, usually no need to change it.

 

The cruise control system is only fit for DC12V vehicles with 6 wire electronic throttle connector.

You may need to test your throttle wire function for confirmation before buying.

Install it by a trained alarm installer if you have no such kind of products installation experience.

This item need to be installed by a trained installer only.

You have to do a programming after finish wiring connection ,refer to the operation manual of how to do this.

 

 

When car speed over 40km/h, press on/off switch to turn on/off cruise function, once turn on the cruise function, the LED indicator will turn on, press the handle to(-SET) direction,release the foot on accelerator pedal. The cruise control is turn on. Press up the handle will accelerate and press down will decelerate speed.

 

Cruise control suspended: while the cruise control function is turn on, step on brake pedal or press the handle to CANCEL direction will suspend cruise function.

 

Press  the handle to(+RES) directly will turn on

 

Press on/off switch will turn off the cruise control function.